---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-STABLE #0 stable/13-n247300-e5d000b3338: Thu Sep 16 02:29:51 UTC 2021
    root@releng3.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 12.0.1 (git@github.com:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f)
VT: init without driver.
module firmware already present!
real memory  = 15707078656 (14979 MB)
avail memory = 15292444672 (14584 MB)
Starting CPU 1 (1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: unblocking device.
random: entropy device external interface
MAP 3e4820000 mode 2 pages 128
MAP 3e48a0000 mode 2 pages 192
MAP 3e4960000 mode 2 pages 80
MAP 3e49b0000 mode 2 pages 160
MAP 3e4a50000 mode 2 pages 160
MAP 3e7dd0000 mode 2 pages 144
MAP 3e7e70000 mode 2 pages 288
MAP 4000000 mode 0 pages 16384
MAP 9010000 mode 0 pages 1
kbd0 at kbdmux0
acpi0: <BOCHS BXPCFACP>
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller> iomem 0x8000000-0x8000fff,0x8010000-0x8010fff on acpi0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 288
gic0: frame: 0 8020000 1 64 80
gicv2m0: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x8020000-0x8020fff on gic0
gpio0: <Arm PL061 GPIO Controller> iomem 0x9030000-0x9030fff irq 33 on acpi0
gpiobus0: <GPIO bus> on gpio0
generic_timer0: <ARM Generic Timer> irq 34,35,36 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 25000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cpu0: <ACPI CPU> on acpi0
uart0: <PrimeCell UART (PL011)> iomem 0x9000000-0x9000fff irq 0 on acpi0
uart0: console (9600,n,8,1)
pcib0: <Generic PCI host controller> on acpi0
pci0: <PCI bus> on pcib0
virtio_pci0: <VirtIO PCI (legacy) Block adapter> mem 0x10002000-0x10002fff,0x8000000000-0x8000003fff at device 1.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci0
vtblk0: 1018880MB (2086666240 512 byte sectors)
virtio_pci1: <VirtIO PCI (legacy) SCSI adapter> port 0x80-0xbf mem 0x10001000-0x10001fff,0x8000004000-0x8000007fff at device 2.0 on pci0
vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI (legacy) Network adapter> port 0x100-0x11f mem 0x10000000-0x10000fff,0x8000008000-0x800000bfff at device 3.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci2
vtnet0: Ethernet address: da:0c:ea:45:5e:58
virtio_pci3: <VirtIO PCI (legacy) Entropy adapter> port 0xe0-0xff mem 0x800000c000-0x800000ffff at device 4.0 on pci0
virtio_pci4: <VirtIO PCI (legacy) Balloon adapter> port 0xc0-0xdf mem 0x8000010000-0x8000013fff at device 5.0 on pci0
gpioc0: <GPIO controller> on gpio0
acpi_button0: <Power Button> on acpi0
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Timecounters tick every 1.000 msec
usb_needs_explore_all: no devclass
CPU  0: ARM Cortex-A72 r0p1 affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <CSV3,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <>
      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
      Memory Model Features 1 = <8bit VMID>
      Memory Model Features 2 = <32bit CCIDX,48bit VA>
             Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU  1: Unknown Implementer (midr: 00000000) affinity:  1
Release APs...Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
done
WARNING: / was not properly dismounted
vtrnd0: <VirtIO Entropy Adapter> on virtio_pci3
random: registering fast source VirtIO Entropy Adapter
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci4
lo0: link state changed to UP
vtnet0: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled

=== ifconfig

vtnet0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80028<VLAN_MTU,JUMBO_MTU,LINKSTATE>
	ether da:0c:ea:45:5e:58
	inet 192.168.1.50 netmask 0xffffff00 broadcast 192.168.1.255
	inet6 fe80::d80c:eaff:fe45:5e58%vtnet0 prefixlen 64 scopeid 0x1
	inet6 2a01::50 prefixlen 64
	inet6 2a01::51 prefixlen 128
	media: Ethernet autoselect (10Gbase-T <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

=== df -t ufs -h

Filesystem         Size    Used   Avail Capacity  Mounted on
/dev/gpt/rootfs    963G    3.2G    883G     0%    /